TankerTherm 123 Release Notes
This manual carries two labels: Software v2.2 · Manual Rev 1.
-
The software version is the PLC program this manual describes. It matches the Version line on the PLC Status screen. To check that you are reading the right manual, see Which manual matches my unit?.
-
The manual revision counts every published change to this manual, including corrections and added photos that have nothing to do with the PLC program. It is a whole number and is separate from the software version.
Download this manual as a PDF: Software v2.2, Manual Rev 1.
Software builds
The program builds covered by this manual.
| Build | Status screen shows | Date | What changed |
|---|---|---|---|
v2.2.1 |
|
3 November 2026 |
First release of Software v2.2. Adds the PURGE screen, the Tank Heat thermostat and the refill pressure sensor fault; removes the auxiliary circulation pump. |
Revisions to this manual
Newest first. This manual is at Rev 1, published 19 November 2026.
Rev 1 — 19 November 2026
First issue of the manual for PLC software v2.2. It is the Software v2.1 manual with the pages that differ rewritten for v2.2.
-
What Changed Since Software v2.1 — the differences in one place.
-
Startup & First Heat Cycle — the air purge is run from the PURGE screen. No boiler cover removal and no wiring work.
-
Temperature Control — the Tank Heat thermostat.
-
PLC Controls and Setpoints — the path to every screen, and the range the PLC accepts for each setting.
-
Troubleshooting — the
REFILL SENSOR FAULTlockout.